True Ames Bonzer 6'5" - Black

Add to Wishlist


Next Previous


This fin was designed by the Campbell Brothers with the intention and specific purpose of being paired with their Bonzer Surfboards. This center fin is meant to complement the unique bottom contours and fin setups of their 3 and 5 fin designs.

The Bonzer fin works synergistically with the additional runners to efficiently and effectively organize water flow across the bottom of the surfboard, resulting in a highly optimal transfer of energy. If you have a Bonzer board, this fin is the official prescription prescribed by the Brothers Campbell to fix it up for maximum performance.

HOW THE BONZER SYSTEM WORKS

 

The primary purpose of the Bonzer system is to efficiently organize water flow. We have done this by designing fin and bottom systems that work in a synergetic fashion in order to maximize the use of the energy that is created by the water passing through the tail area of the board. When you’re doing a turn, the water travels diagonally across the bottom of your board. The Bonzer side fins have a base totaling 9-3/4” on each side, and a maximum depth of only 2-3/4”. The angle, combined with the shallow depth of the fins, allows the fins to come in and out of the water with little resistance. This makes rail-to-rail transition much easier, which in turn allows you to keep your board on the rail with much less effort.

While turning, the fins on the inside rail are fairly vertical in the water, providing very refined edge control. As the water races across the bottom, the outside fins deflect it down and back through the tail. We have always looked at the water that escapes off the outside rail as unused energy. The combination of the Bonzer concaves and the long base of the side fins redirect far more water through the tail area than other designs. This maximizes the use of the force that is created during turns. The fins are essentially an extension of the concaves and, since water adheres to curved surfaces, there is very little disturbance as the water passes through the fin area. This dramatically reduces drag. Basically, we have tried to create surfboards that you can get more out of with less effort and energy input. It’s all about reducing entropy.